Leak Detection Systems

Leak Detection Systems

Title Here

Wideco of Sweden provides the best cutting-edge surveillance system for leak detection in the piping network. Wideco has successfully built the complete concept for monitoring pipe systems, GPRS– based, that operates 24/7 and can be adapted to suit transmission, distribution, and district cooling solutions.

 

Title Here

DISTRICT COOLING PIPES

3dc Sensor Cables with LAN/GPRS Nordic Sensor Cable with LAN/GPRS

 

Title Here

WATER & SEWERAGE SYSTEM

W3 Sensor Cables with LAN/GPRS

 

Title Here

DATA CENTER

Multizone M3 Cables with LAN/GPRS

 

WIDETECT CABLE 3DC

Joints

Assembling of the different cable segments shall be done with the assistance of un-insulated joint terminals and pressure tools according to conventional technology. This joint technology is surely tested and gives each joint very low serial resistance. Each joint is after assembling sealed with a crimp sleeve.

Design

The exact parallel wire pairs provide the same impedance along the entire length of the cable, which facilitates detecting and localisations of even minor faults.

Function

WiDetect Cable 3dc, is intended to be used for district cooling piping with steel or plastic service pipe. The cable’s unique design avoids problems with condensation moisture between the wire / wire and carrier pipe along the pipe lengths, but especially on the pipes and pipe sections and in other parts of joints.

Mounting

At the production of district cooling pipes and fittings, the WiDetect 3dc cable is assembled directly close to the media pipe. Also in field joints, the cable shall be located directly against the media pipe. We recommend reading the 3dc user manual before mounting starts.

Flexible

The special design of the cable permits that impedance changes from wet insulation, of a certain size, can be detected, although the cable is insulated along the whole cable length.
Max measuring length with X3 is 3000 meter.

Properties

The outer conductors (red/red) form a loop and the water measurement is done against the middle conductor (black). Connecting of cables in a T- branch. This item is prefabricated. Cable length: main pipe 2 x 2 m,  branch pipe 3 m.

  • Minimizes condense problems in pipes and fittings
  • Fast installation in the production stage
  • More than 170.000 m delivered
  • Can be used to both steel – and plastic pipes
  • Easy to assemble and connect in the field
  • Constant distances between wires in the cable
  • Facilitates fault detection in fields
Top